A-10 Warthog Fighter Jet w/ Twin 75mm EDF (ARF)
RC Models and Spares » Planes ARF,RTF,KIT » All Models|RC Models and Spares » Planes ARF,RTF,KIT » EDF JET|RC Models and Spares » Planes ARF,RTF,KIT » Warbirds
A-10 Warthog Fighter Jet w/ Twin 75mm EDF (ARF)
Price:95.90AUD
Ships from Global Warehouse
in stock
The A-10 Fighter jet comes 80% pre-built and requires two 20A ESCs (40A Total), 2 brushless motors and 4 x 9 grams servos, a 2200 3S1P Lipoly batter and your own Transmitter and Receiver (Tx/Rx) to complete.
Scale model enthusiests will notice the engines to be larger than the real life model, this model is designed this way to increase acceleration performance without increasing Amp load; keeping the battery, esc and motors under 20A in size.
This well detailed jet uses two 75mm ducted fan units to provide fast throttle response and a high top speed.
Spec.
Scale model enthusiests will notice the engines to be larger than the real life model, this model is designed this way to increase acceleration performance without increasing Amp load; keeping the battery, esc and motors under 20A in size.
This well detailed jet uses two 75mm ducted fan units to provide fast throttle response and a high top speed.
Spec.
Wing Span : 1017mm
Length : 916mm
Height: 284mm
Wing loading: 59g/dm2
Height: 284mm
Wing loading: 59g/dm2
Flying Weight: 970g
Servo: 4x9g (Required)
Motor: 2 x 30-XX Brushless outrunner 3900kv with 3mm Shaft (Required)
Motor: 2 x 30-XX Brushless outrunner 3900kv with 3mm Shaft (Required)
ESC: 2x20A (Required)
Duct fan: 2 X 75mm
Battery compartment size: 115x50x40mm
Required:
4 x 9g Servos
2 x 30-XX Brushless outrunner 3900kv
2 x 20A ESCs
Your own TX & RX
2 x 30-XX Brushless outrunner 3900kv
2 x 20A ESCs
Your own TX & RX
11.1V 2200mah 3S 25C Lipo